(Muppet) Christmas (Carol) in June: Emma's Gift

  First, before  I forget, I know a  lot of us have found some great dolls at Tuesday Morning. Well Tuesday Morning is closing a load of locations all across the country. Some items are already discounted up to 30% off, and there are extra discounts on already clearanced items. The full list of locations that are closing across the country can be found HERE.
  This is sad. They carried a lot of nice things, interesting items that weren't available anywhere else around here, and hugely discounted, formerly expensive dolls. We're losing one in Columbus, where I go to Tuesday Morning, but not one of the locations I ever go to.
  Now, on to today's subject, which is, the gift I made for Emma for her birthday. I have to explain first that I had had this thing designed in my mind for about 2 and a half  years! I think I developed the idea when Hallmark came out with their Muppet Christmas Carol ornament in 2017.

The Hallmark ornament. Kermit's head is too big.

 At the time I said, they should have made him over a rolling cylinder, with floppy legs, so he could walk like he does in the movie. In the movie, "The Muppet Christmas Carol", Kermit, as Bob Cratchit,(with Robin as Tiny Tim on his shoulder), walks down the street singing. The street is obviously round, or drum shaped, and turned beneath his feet, with a green screen background behind him, to give the illusion that he's moving down the street. You can watch that clip from the movie HERE. I had the idea that I could make an ornament like that, using a thread spool for the street,(covered with fake snowy cobblestones.),and a polymer clay Kermit and Robin. If I made his legs joined and put staggered bumps on the spool that would hit his feet alternatingly, making it look like he was walking. I kept meaning to make the ornament. But then I wouldn't start in time  to get it made for Christmas, then not in time to get it made for her birthday. Because of not being able to go out shopping at all these last few months I didn't have much for Emma's birthday, so this was the perfect time to make a gift. Her birthday was a good time to do it too, so she'd have the ornament in time to use it at Christmas. So I started, probably much later than I should have. I had some problems, including not being able to find my clay! I ended up being able to use a set of Sculpey I gave Fuzz, since Fuzz gave it to me because he wasn't going to use it,(In spite of being a very talented artist and sculptor.),but there was no white clay! I remembered I had a whole box of clays my sister gave me,(Another talented artist, who says she can't sculpt.),but there was no white in there either! I finally remembered there was a zip lock bag of extra clay Fuzz also gave me, and luckily there was some white in it. Then, of course, I couldn't find my blade to cut the clay either, or my clear plexiglass bar to roll the clay out with. I'm sure both of those are in the box with my clay! So I resorted to other tools and a porcelain rolling pin we never use any more because one of the handle ends got lost and now the wooden pin won't stay in the middle, so there are NO handles. So here are the tools I ended up using. Keep in mind that these are the sorts of things I use anyway most of the time, because I stink as a artist.

Paint, glitter, paint brushes, wire cutters and wire bending thingies, needles for poking clay with, and a big headed pin for smoothing certain parts, two types of wire, plus a recycled wire from a Chinese take out container. I'll show you where that was used in a minute.

Tweezers, and I actually cut the clay with those little scissors. By the way,that's my mom's pin cushion. It was always in her sewing box and I use it all the time.

One of the tools I used the most, I forgot to put in the picture!

Yes, that is what you think it is: one of those plastic hanger things from a package of some sort. I used it to cut the clay because I couldn't find my blade, which I had even pulled out to use the day before I started on the ornament.
  I was able to get a lot of different colours by mixing some of my sister's more unusual clay colours with Fuzz's more basic colours set. Here are all the colours I used, except the dark red I used straight from the pack for the inside of the mouths.
 

Various shades of brown and green.

And then there was this:
 

The egg carton was to make the fake cobblestones on the spool. I've been wanting to try making stone with egg carton for ages, but this was my first try.  I used the Fabric-Tac to glue the pieces of egg carton to the spool. Afterward I painted it with a mix of green and black acrylic paint to get and old, dirty, mossy stone look, but then I covered it with white glitter anyway. I couldn't find my other white glitter either! So this glitter has too much of a green shine to it, so the snow looks too green. I told Emma I would touch the spool up with some better, whiter snow looking glitter before Christmas.

  I used a box that something from Bath and Body Works came in to put the ornament in.

It ties shut with a ribbon.

  So how did the ornament turn out? For reference, before I show you the ornament I made, here's a still from the movie:
 

 And here's what the ornament looks like.

I took out the flocked plastic inside the box, and lined it with polyfil, which I covered with vintage satin.

And there's where the wire from the take out box came in!

  It turned out pretty good. Kermit ended up being about 4 or 5 inches tall. 

Little Robin is slightly over an inch, and with about a half an inch of leg length, I think.

At least Kermit's face turned out fairly good.

It's harder than you think to make a Muppet and have it actually look like the Muppet it's supposed to. They aren't as detailed as people, but they still have a particular look. I had to do adjustments as I worked, making Kermit's mouth slant downward enough and getting his eyes forward enough on his head. And those eyeballs had to be tilted just right.

Those checked pants are terrible!

Robin could have been better though.
 

Kermit's hat turned while baking, from the weight of it, and it tore Kermit's thumb off! The thumb was still attached to the hat, so I had to paint it black to disguise it!

I goofed on Robin's butt. It ended up being too big, so I cut a hunk off, thinking I would be able to cover the chop because his bottom would be sitting on Kermit's shoulder. Of course, then he didn't fit on Kermit's shoulder properly, so his bottom shows!

I also didn't think about the fact that I'd have to make checked pants!

That wasn't so easy. I got all over confident after making Kermit's checked vest, which peeks out between his coat and the top of his his pants.

The pants were a lot harder! I see I also should really have used that Sculpey stuff that smooths the surface and gets rid of the fingerprints, etc. It sort of melt s the surface of the clay though, and I was afraid it would take over and I'd lose detail. All I needed was to get all finished, and then make the whole thing so slimy it couldn't even be held on to.
  Kermit's coat changes lengths in the movie! In the scene where he's walking down the street, that this ornament represents, his coat is short, and nowhere behind his legs. I think that was so you could see his leg movements better. In the other scenes, and in the publicity still I showed you, above, his coat is long. I compromised by making his coat long, but flying up behind him

Oops. Looks like Robin has a hole in the seat of his pants!

 

  As you can see, there are still fibers stuck to them from the polyfil I laid them on to bake. I also had to stuff it between his legs and under the tails of his coat, so they didn't bake to each other.

His coat tails actually stick out farther than I intended.
 

Sorry about these blurry pictures. My auto focus is still not working and I had to hold it and focus, while also holding the camera. I don't have three hands, but that's what it requires. For some of these I got Ivy to hold it. or it was laid down.

And did the walking action work? Well...no. It did not.

I think I should have jointed Kermit's legs only at the knees...or maybe only at the hips. In any case, I even tried the alternating bumps in the sidewalk, and it still didn't make him 'walk'.

 

  And I got so excited when I finally finished the ornament, very late on the night before Emma's birthday, that I forgot to put on a loop or hook to hang it by! I ended up having to hang everything from Robin's arm!
 

I hope it doesn't break off! I also forgot to put tails on Robin's coat! Oh well. Little boys did wear those short coats back then.

   

  So that's it. It didn't work, after having it all planned out in my head for nearly three years.

 

Doesn't look too bad though.

Doll-A-Day 2019 #362: Jim Henson and Other Gifts

  Today we're looking at my other doll related presents from this Christmas. First we'll see the 'related',and then we'll see the doll. Here is the pile of doll related items everybody gifted me with.

The socks in a sweater set was a find of Ken's.

I'll have to take the stitching out of the bottom of the little sweater the socks came in, and then it will be a doll sweater. (They came from Big Lots,if anybody wants to see if their local one still has any. There were three styles.)
  Emma got me the set of tiny cleaning items.
 

The little mini Pac-Man game was from Ivy.When she spotted one a friend had, she knew she had to get me one.

It's tiny. It's sort of Kelly doll sized. And the best part? You can really play it!

Emma got me the set of little chairs at Ikea.

I think they are actually hooks to hang things on your wall.

They are just the right size for Tammy World.

  Of course,I got some things that weren't doll related.I got some items for my reading and viewing pleasure.

From Ken's sister Diane,from Ken,and from Emma.

And some things for my listening pleasure, from Emma and Ivy.

There were some other things too,like some lilac soap,pumpkin curd,(sort of like apple butter),some pumpkin spice syrup, There was also the doll for today from Emma, which is this guy.

It's Jim Henson,obviously,with Kermit.

He's a Pop Vinyl doll.

This doll does not have legs that long!

He's part of the Pop Icons series I assume.

Like all Pop Vinyl dolls,this one has a simple look that captures the character it represent in a few details.

In this case the details are Jim Henson's beard and gray hair.

And of course his Kermit.

  That's the doll for today. The year is almost over,but we have a few more days of daily dolls. Tomorrow we'll see another one.